Skip to navigation Skip to content

Search for:

Home
Checkout
Cart

Home
Cart
Checkout
Products
Terms and Conditions

$0.00 0 items

Home / Products / Page 4

Products

Showing 13–13 of 13 results

←
1
2
3
4

NA6 Fan Switch Connector
$15.00 Add to cart

Showing 13–13 of 13 results

←
1
2
3
4

garagebrisco

Modern Designs For Classic Roadsters

Since the original side mirrors are frozen, I boug

Since the original side mirrors are frozen, I bought some universal side mirrors knowing I'd have to come up with a mounting solution. I didn't realize how tiny they'd be. Will print in CF-ASA once I'm happy with the design.

All tombstone switch sets with stainless steel but

All tombstone switch sets with stainless steel buttons are now 30% off until I learn how to double check my order with my button supplier 😬. You will never, ever see a price this low on these buttons again, so don't wait if you want them!

Brought along a full set of tools in case anything

Brought along a full set of tools in case anything went wrong. Forgot a jack. Luckily I found myself stranded next to PMB Performance. Every person I spoke with was friendly and eager to help even more than I asked. If I ever scratch that itch to own a 914, this is where I'm heading. Many thanks for your help today, @pmb_performance !

No more ugly overhangs. BVOH is marketed as a wate

No more ugly overhangs. BVOH is marketed as a water soluble support, but it sticks so well and separates so easily that it doesn't even need to be dissolved.

I finally got this car off of jack stands. Now it'

I finally got this car off of jack stands. Now it's time to put it back on jack stands 🙄😂

New aluminum-like powder coat for the metal option

New aluminum-like powder coat for the metal option. I'm not going to be able to replicate the brushed metal look, so I went with a tiny bit of sparkle. It's a matte finish that pops when the light hits it at the right angle.

I'm happy to announce that OEM(ish) green is in st

I'm happy to announce that OEM(ish) green is in stock and ready for your Miata!

These buttons feature green LEDs that are close in color to the OEM bulb caps, but much brighter and crisper. The green in this image is not popped at all, and it looks even more vibrant in person.

Grab a set at www.garagebrisco.com (link in bio for IG users)

#miata #mx5 #eunosroadster

BTS #miata #mx5 #eunosroadster

BTS #miata #mx5 #eunosroadster

I finally decided to upgrade my powder coating set

I finally decided to upgrade my powder coating set up to something less ear splitting than a 90db harbor freight special and more effective than a diy exhaust. IT'S SO MUCH BETTER!!!

I needed to test some TPU filament...why not make

I needed to test some TPU filament...why not make something functional(ish)?

I somehow managed to pick the hottest day this yea

I somehow managed to pick the hottest day this year to prep this dusty, ventless shed for powder coating. 105°F outside and 93°F inside 🥵🥵

Fun fact: I'm not a young person. I just got a lat

Fun fact: I'm not a young person. I just got a late start 😁

First batch since wrist surgery. My hands don't ha

First batch since wrist surgery. My hands don't have the same stamina for cutting, stripping, and crimping that many wires, but it doesn't hurt. So that's a win.

Instagram post 17998573381786393

Instagram post 17998573381786393

Cutting the metal plates is one of the few things

Cutting the metal plates is one of the few things I don't do myself. The shop does a great job, but they still require a little work before I powder coat them. I file the outside edge, and use the deburring tool on all edges to make the edges smooth and help prevent powder build up. It's one of the steps I've added along the way to make the best product I can.

#miata #mx5 #eunosroadster

Not long after I posted pictures of the parts behi

Not long after I posted pictures of the parts behind the tombstone on my hazard + pop-up switches, my supplier changed the number of threads on these buttons. That made them too short for the NA8 Curved Tombstone.

So I redesigned the NA8 supporting parts...again. The new design has two mounting nuts 3d printed in Carbon Fiber Nylon and a new tool that makes it much easier to tighten everything down.

I finally figured out how to create a custom threa

I finally figured out how to create a custom thread, 19mm with 1mm thread pitch. Printed in NylonX with .6 nozzle at .15 layer height. I'm shocked this worked so well on the first attempt. It has less play than my push button switches.

It has a beautiful matte finish IRL, but I used harsh lighting and stacked extension tubes along with some heavy handed editing to pull out the details. For you photogs out there, this was shot at f22 and still has a razor thin DOF. The nut was about 3 inches from the camera lens, practically touching the lens hood. Extension tubes are fun to play with.

It looks...happy? 🥹😁 I'm working on the inte

It looks...happy? 🥹😁 I'm working on the interior lights for Finn. These visor lights, along with additional yet-to-be-designed lighting, will be wired into the switch on my radio panel.

Unlike any visor lights kits I've seen, mine will be completely plug and play. No soldering to the OEM light switch or cutting the car's wires. And it will work for both turning the light on and the door open function.

This is personal project designed for parts that I have on hand, but I can sell these if there's enough interest. #miata #mx5 #eunosroaster

First print with NylonX (Nylon with Carbon Fiber)

First print with NylonX (Nylon with Carbon Fiber) was very illuminating. Some might say I was blinded by the light. Because I was. #miata #mx5 #eunosroadster

My radio blanking panel is becoming very not blank

My radio blanking panel is becoming very not blank. The bandages make it kinda hard to use a mouse, but the pain killer is (mostly) doing its job 😬 #miata #mx5 #eunosroadster

Load More... Follow on Instagram

© Garage Brisco 2025
Built with WooCommerce.

My Account
Search

Search for:
Cart 0